Home > Medical Services > Imaging > Bone Density
A+ A-

Bone Density

What is a Bone Density Scan (DXA)?

Bone density scanning, also called dual-energy x-ray absorptiometry (DXA) or bone densitometry, is an enhanced form of x-ray technology that is used to measure bone loss. DXA is today's established standard for measuring bone mineral density (BMD).

An x-ray (radiograph) is a noninvasive medical test that helps physicians diagnose and treat medical conditions. Imaging with x-rays involves exposing a part of the body to a small dose of ionizing radiation to produce pictures of the inside of the body. X-rays are the oldest and most frequently used form of medical imaging.

 

What are some common uses of the procedure?

DXA is most often used to diagnose osteoporosis, a condition that often affects women after menopause but may also be found in men. Osteoporosis involves a gradual loss of calcium, as well as structural changes, causing the bones to become thinner, more fragile and more likely to break.

DXA is also effective in tracking the effects of treatment for osteoporosis and other conditions that cause bone loss.

The DXA test can also assess an individual's risk for developing fractures. The risk of fracture is affected by age, body weight, history of prior fracture, family history of osteoporotic fractures and life style issues such as cigarette smoking and excessive alcohol consumption. These factors are taken into consideration when deciding if a patient needs therapy.

Bone density testing is strongly recommended if you:

  • are a post-menopausal woman and not taking estrogen.
  • have a personal or maternal history of hip fracture or smoking.
  • are a post-menopausal woman who is tall (over 5 feet 7 inches) or thin (less than 125 pounds).
  • are a man with clinical conditions associated with bone loss.
  • use medications that are known to cause bone loss, including corticosteroids such as Prednisone, various anti-seizure
  • medications such as Dilantin and certain barbiturates, or high-dose thyroid replacement drugs.
  • have type 1 (formerly called juvenile or insulin-dependent) diabetes, liver disease, kidney disease or a family history of osteoporosis.
  • have high bone turnover, which shows up in the form of excessive collagen in urine samples.
  • have a thyroid condition, such as hyperthyroidism.
  • have a parathyroid condition, such as hyperparathyroidism.
  • have experienced a fracture after only mild trauma.
  • have had x-ray evidence of vertebral fracture or other signs of osteoporosis.
     

 

How should I prepare?

On the day of the exam you may eat normally.

You should not take calcium supplements for at least 24 hours before your exam.

You should wear loose, comfortable clothing, avoiding garments that have zippers, belts or buttons made of metal. Objects such as keys or wallets that would be in the area being scanned should be removed.

You may be asked to remove some or all of your clothes and to wear a gown during the exam. You may also be asked to remove jewelry, dentures, eye glasses and any metal objects or clothing that might interfere with the x-ray images.

Inform your physician if you recently had a barium examination or have been injected with a contrast material for a computed tomography (CT) scan or radioisotope scan. You may have to wait 10 to 14 days before undergoing a DXA test.

Women should always inform their physician and x-ray technologist if there is any possibility that they are pregnant. Many imaging tests are not performed during pregnancy so as not to expose the fetus to radiation. If an x-ray is necessary, precautions will be taken to minimize radiation exposure to the baby.

 

How does the procedure work?

The DXA machine sends a thin, invisible beam of low-dose x-rays with two distinct energy peaks through the bones being examined. One peak is absorbed mainly by soft tissue and the other by bone. The soft tissue amount can be subtracted from the total and what remains is a patient's bone mineral density. DXA machines feature special software that compute and display the bone density measurements on a computer monitor.

 

How is the procedure performed?

This examination is usually done on an outpatient basis.

In the Central DXA examination, which measures bone density in the hip and spine, the patient lies on a padded table. An x-ray generator is located below the patient and an imaging device, or detector, is positioned above.

To assess the spine, the patient's legs are supported on a padded box to flatten the pelvis and lower (lumbar) spine. To assess the hip, the patient's foot is placed in a brace that rotates the hip inward. In both cases, the detector is slowly passed over the area, generating images on a computer monitor.

You must hold very still and may be asked to keep from breathing for a few seconds while the x-ray picture is taken to reduce the possibility of a blurred image. The technologist will walk behind a wall or into the next room to activate the x-ray machine.

The peripheral tests are simpler. The finger, hand, forearm or foot is placed in a small device that obtains a bone density reading within a few minutes.

The DXA bone density test is usually completed within 10 to 30 minutes, depending on the equipment used and the parts of the body being examined.

What will I experience during and after the procedure?

Bone density tests are a quick and painless procedure.

Routine evaluations every two years may be needed to see a significant change in bone mineral density, decrease or increase. Few patients, such as patients on high dose steroid medication, may need follow-up at six months.

 

Who interprets the results and how will I get them?

A radiologist, a physician specifically trained to supervise and interpret radiology examinations, will analyze the images and send a signed report to your primary care or referring physician, who will discuss the results with you.

DXA scans are also interpreted by other physicians such as rheumatologists and endocrinologists.

Your test results will be in the form of two scores:

T score — This number shows the amount of bone you have compared with a young adult of the same gender with peak bone mass. A score above -1 is considered normal. A score between -1 and -2.5 is classified as osteopenia (low bone mass). A score below -2.5 is defined as osteoporosis. The T score is used to estimate your risk of developing a fracture.

Z score — This number reflects the amount of bone you have compared with other people in your age group and of the same size and gender. If this score is unusually high or low, it may indicate a need for further medical tests.

Small changes may normally be observed between scans due to differences in positioning and usually are not significant.

 

What are the limitations of DXA Bone Densitometry?

A DXA test cannot predict who will experience a fracture but can provide indications of relative risk.

Despite its effectiveness as a method of measuring bone density, DXA is of limited use in people with a spinal deformity or those who have had previous spinal surgery. The presence of vertebral compression fractures or osteoarthritis may interfere with the accuracy of the test; in such instances, CT scans may be more useful.

Central DXA devices are more sensitive than pDXA devices but they are also somewhat more expensive.

A test done on a peripheral location, such as the heel or wrist, may help predict the risk of fracture in the spine or hip. These tests are not helpful in following response to treatment, however, and if they indicate that drug therapy is needed, a baseline central DXA scan should be obtained.